Akai AM-U61

Operator’s Manual
WARNING
POWER REQUIREMENTS
Power requirements for electrical equipment differ
from area to area.
Please ensure that your machine meets the power
requirements in your area. os
If in doubt, consult a qualified electrician.
120V, 60 Hz for USA and Canada
220V, 50 Hz for Europe except UK
240V, 50 Hz for UK and Australia
110V/220V/240V,
50/60
Hz
internally
switchable
for
other
countries.
VOLTAGE CONVERSION
Do not attempt this conversion yourself.
Models for Canada, USA, Europe, UK and Australia
are not equipped with this facility.
Each machine is preset at the factory according to
destination, but some machines can be set to 110V,
220V
or
240V
as
required.
If
your
machine’s
voltage
can
be
converted,
refer
the
following
voltage
conver-
sion
to
a
qualified
Service
Repair
Shop
or
profes-
sional service personnel.
1. Disconnect the power cord.
2. Loosen the holding screws and remove the top
panel.
3. Remove the Line Voltage Fuse and insert the re-
quired Line Voltage Fuse into the proper Fuse
Holder, explicitly following the printed instruc-
tions.
240V 220V 110V
Power
Switch
F1 :6.3A
F2 :3.15A
F3 :3.15A
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELEC-
TRIC SHOCK, DO NOT REMOVE
COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol super- .
imposed across a graphical representation of a per-
son, within an equilateral triangle, is intended to
alert the user of the presence of uninsulated."“dan-
gerous voltage’’ within the product’s encloure ;
that may be of sufficient magnitude to constitute
arisk of electric shock to persons.
The exclamation point within an equilateral trian-
gle is intended to alert the user of the presence of
e important operating and maintenance { servicing )
instructions in the literature accompanying the ap-
pliance.
PRECAUTIONS
Front
1. Use only household AC power sources.
Never use DC power sources.
2. Touching the plug with wet hands risks dangerous elec-
tric shocks.
Always pull out by the plug and never the cord.
3. Make sure the power consumption of each audio com-
ponent does not exceed wattage specified on the rear
panel. Only connect other audio components.
4. Only let a qualified professional repair or reassemble
the equipment. An unauthorized person might touch
the internal parts and receive a serious electric shock.
5. Never allow a child to put anything, especially metal
into this equipment. A serious shock or malfunction
may occur.
6. If water is spilled on this equipment, disconnect and
call your dealer.
7. Make sure the equipment is well ventilated and away
from direct sunlight.
8. Keep away from heat (stoves, etc.) to avoid damage to
the external surface and internal circuits. .
9. Avoid spray-type insecticides which will damage the
equipment and may ignite suddenly.
10. To avoid damaging the finish never use alcohol, paint
thinner or other similar chemicals.
11. Always place the equipment on a flat and solid surface.
12. Please read this manual in its entirety and keep it
handy for further reference.
Placement:
The front rubber feet of the AM-U61 can be repositioned in
order that it may be placed more securely in an audio rack.
Remove the feet with a screwdriver and rescrew them into
the new positions (5cm from the old ones).