EasyManua.ls Logo

Akai AUS-12H53R150P9

Akai AUS-12H53R150P9
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Operating Modes continued
Heat Mode
• Press the Manual Swing button or Swing button to change the air ow direction.
• Press the Fan Speed button to change the fan speed of the indoor unit.
• Press the Temperature Adjustment button to change the set temperature.
Sleep Mode 123
Normal Mode:
Whilst the air conditioner is in Cool and Dry mode
The indoor fan runs at low speed. After one hour of operation the set temperature
will increase by 1˚C. One hour later, the set temperature will increase by 1˚C once
more. The unit will then continue operating at 2˚C above the set temperature.
Whilst the air conditioner is in Heat mode
The indoor fan runs at low speed. After one hour of operation the set temperature
will decrease by 2˚C. One hour later, the set temperature will decrease by 2˚C once
more. The unit will then continue operating at 4˚C below the set temperature.
Sleep Mode 1:
1
Whilst the air conditioner is in Cool and Dry mode
When set to 23˚C≥st≥16˚C:
During the 3 hours after Sleep mode 1 start up, the set temperature will increase by
1˚C every hour. The unit will continue operating at 3˚C above the set temperature.
8 hours later, the set temperature will decrease 2˚C; the unit will then continue
operating at this temperature.
When set to 24˚C≥st≥27˚C:
During the 2 hours after Sleep mode 1 start up, the set temperature will increase by
1˚C every hour. The unit will continue operating at 2˚C above the set temperature. 8
hours later, the set temperature will decrease 2˚C; the unit will continue operating at
this temperature.
When set to 28˚C≥st≥31˚C:
The unit will continue to operate at the set temperature.
Whilst the air conditioner is in Heat mode
When set to 18˚C≥st≥16˚C:

Related product manuals