97
Mixer / Filter
Use this tab to control EQ for Oscillator 2, set the levels of the oscillators and effects, and edit the low-pass filter.
Parameter Description
alue Range
Osc 2 EQ Gain
Amount of gain applied to the selected Frequency.
-48 – 0 – +48 dB
Frequency Center frequency for the equalization band. 25 – 10,000 Hz
Drive
mount of drive added to the EQ signal. 0–100%
Keytrack Ties the EQ settings to the pitch being played 0–100%
Mixe
Osc 1 Level of Oscillator 1. 0–100%
Osc 2 Level of Oscillator 2. 0–100%
Sub Osc Level of the Sub Oscillator. 0–100%
Ring Mod Level of Ring Modulation effect. 0–100%
Drive Level of Drive effect. 0–100%
LP Filte
Cutoff Center frequency of the low-pass filter cutoff. 0–100%
Reso
mount of resonance of the low-pass filter. 0–100%
Slope
mount of attenuation applied above the cutoff
frequency.
0 – 24 dB/oct
Saturation
mount of saturation applied to the low-pass filter. 0–100%
Env Percentage of the envelope output subtracted from or
added to the LP Filter Cutoff.
-100 – 0 – +100%
Keytrack
Ties the LP Filter Cutoff to the pitch being played.
0–100%
To Next Page
Loading...
