Akai FORCE

98
Envelope
Use this tab to adjust the various envelope settings.
Parameter Description
V
alue Range
Filter Envelope
A
ttack Length of time for the filter to reach full level. 1.00 ms – 100 s
Decay Length of time for the filter to reach sustain level. 1.00 ms – 100 s
Sustain Level that a sustained note is held at, as a percentage
of the maximum level.
0–100%
Release Length of time for the filter to dissipate when released. 1.00 ms – 100 s
A
mp Envelope
A
ttack Length of time for the note to reach full level. 1.00 ms – 100 s
Decay Length of time for the note to reach sustain level. 1.00 ms – 100 s
Sustain Level that a sustained note is held at, as a percentage
of the maximum level.
0–100%
Release Length of time for the note to dissipate when released. 1.00 ms – 100 s
Envelope 3 Start Level Initial velocity level of the envelope. 0–100%
Start Time Length of time for the envelope to start. 0–5000 ms
Slope Hold
A
mount of Envelope subtracted from or added to the
Destination when a note is held.
-100 – 0 – +100%
Slope Rel
A
mount of Envelope subtracted from or added to the
Destination when a note is released.
-100 – 0 – +100%
Destination Where the envelope will be applied to. Off, Pitch, Osc 2 Pitch,
LFO 1/2 Rate, Osc1 Quad
Det., Osc 1/2 Shape, Osc
1/2 Level, Ring Level