99
LFO
Use this tab to adjust the settings for the low-frequency oscillators.
Parameter Description
alue Range
LFO 1
LFO 2 Shape Waveshape of the low-frequency oscillator. Sine, Square. Saw Up,
Saw Down, Pump, S&H,
Drift
Destination Where the low-frequency oscillator is sent.
LFO1:
Off, Pitch, Filter, Level,
Pan
LFO2:
Pitch, Osc 1/2 Shape,
Osc 1/2 Pitch, LPF, Quad
Detune, Osc 2 EQ Freq,
Osc 2 EQ Gain, Ring
Level
Rate Speed of modulation.
When Sync is Off:
0.01 – 20.00 Hz
When Sync is On:
8/4 – 1/32
Depth
mount of modulation applied. 0–100%
Fade
pply a fade-in or fade-out of the LFO signal. 0.00 – 20.00 s out,
No fade,
0.00 – 20.00 s in
Sync
Sync the LFO Rate to the Global Tempo or turn Off to
adjust Rate by Hertz.
Off, On
Modulation Source Where the modulation signal is sent from. Filter Env, Amp Env, Osc
1, Osc 2
Destination Where the modulated signal is received. Pitch, Osc 1/2 Shape,
Osc 1/2 Pitch, LPF, Quad
Detune, Osc EQ 2 Freq,
Osc 2 EQ Gain, Ring
Level
Depth
mount of modulation applied. -100 – 0 – 100%
To Next Page
Loading...
