Akai MPC - Page 102

102
Delay LP
The LP and HP Delay is identical to the Mono Delay, but they use a resonant filter in the delay
line.
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 50 Q9
Time 2 - 2000 ms 500 Q10
Feedback 0 - 100 50 Q11
Cutoff 0 - 100 50 Q12
Resonance 0 - 100 20 Q5
Delay HP
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 50 Q9
Time 2 - 2000 ms 100 Q10
Feedback 0 - 100 50 Q11
Cutoff 0 - 100 33 Q12
Resonance 0 - 100 33 Q5
Delay Analog
Analog Delay is similar to Mono Delay, except that it's designed to sound like an analog "Bucket
Brigade"-style delay. This delay has a unique character to it that gives a warmer the sound by
adding subtle inaccuracies in phase and timing.
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 50 Q9
Time 2 - 2000 ms 100 Q10
Feedback 0 - 100 25 Q11
Ramp Off, Pulse, DC, AC AC Q12
Delay Analog Sync
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 50 Q9
Time 1 bar - 1/16tr 1/4 Q10
Feedback 0 - 100 25 Q11
Ramp Off, Pulse, DC, AC AC Q12