62
5.9 TRACK VIEW MODE
The Track View mode gives you an overview of the tracks of each sequence. Use this mode to
edit tracks and sequences simultaneously.
X To enter the Track View mode, press SHIFT + MAIN/ TRACK on your MPC hardware.
In the MPC software, click on the Track View tab in the Upper section.
Depending on what kind of Program is selected, the Track View mode will look different. When a
DRUM Program is selected, the Track View displays the drum grid. When a KEYGROUP
Program is selected, the Track View displays the piano roll editor.
Track View: DRUM Program
Track View: KEYGROUP Program
 Working in the Track View is similar as working in the basic grid. For more information about
the parameters and functionality of the Track View please refer to the chapter "The Grid
mode."
 We recommend using the Track View when you want to switch quickly between Tracks for a
faster editing process.
To Next Page
Loading...
Need help?
General
