47
X On the MPC hardware, click on the WINDOW button to open the Edit Current Program display
page. Press F2 (Delete) to delete the selected Program. To avoid accidental deletion, a query
display opens for confirmation. Press F4 (Copy) to make a copy of the selected Program. This
also adds a "-1" to the new Program name. Press F5 (Close) to close the Edit Current
Program display page. This can also be done for Sequences (Seq) as well as Tracks (Trk).
The Edit Current Sequence section in the display of the MPC hardware
Right-click on a Sample to open a context menu with the following options:
• Delete deletes the selected sample. To avoid accidental deletion, a query window opens
for confirmation.
• Save saves the current sample to your hard disk. A dialog window opens automatically
where you can choose a data path for saving.
• Rename opens a window where you can rename the selected sample. This doesn’t affect
the original file’s name.
• Edit opens Sample Edit Mode for the selected sample. For more information on that,
please refer to the chapter "Sample Edit Mode."
5.6 PROGRAM EDIT MODE
Program Edit Mode contains all parameters for editing each layer of a sound program as well as
all synthesis parameters and the insert effect settings. If a virtual instrument (PlugIn) or a MIDI
instrument is selected, Program Edit Mode will look different.
 When working with the MPC Renaissance, you will recognize that all parameters of Program
Edit Mode are arranged in a grid with up to 16 parameters. These parameters correspond to
the 16 Q-Link knobs of the MPC Renaissance and are fast and intuitive to use.
 The MPC Studio is equipped with 4 Q-Link knobs which can be assigned to the corresponding
Q-Link knob column with the SCROLL dial above the Q-Link knobs.
X To enter Program Edit, press the PROG EDIT button on your MPC hardware.
In the MPC software, click on the Program Edit tab in the Upper section.
The appearance of Program Edit Mode may vary, depending on the selected program. If you have
created a DRUM program, there are fewer parameters than for a KEYGROUP program. To
familiarize yourself with DRUM and KEYGROUP Programs, please refer to Chapter 5.0.
X To edit the play and sound parameters of a particular pad in a DRUM program, you can simply
select it by striking the corresponding pad of your MPC hardware. Use the PAD BANK buttons
to select a desired bank. The program settings will change automatically in the display of your
MPC hardware. This procedure is not possible for KEYGROUP programs.
To select a DRUM program for editing in the MPC software, you have to select the desired pad
first in Main Mode.
To Next Page
Loading...
Need help?
General
