63
5.10 SONG MODE
In Song Mode, you can arrange sequences to create songs.
X To enter Song Mode, press the SONG button on your MPC hardware
In the MPC software, click on the Song tab in the Upper section.
In Song mode, you can set an order of sequences and play them subsequently. Song Mode is
useful when you are creating a song by combining short sequences. You can edit the structure of
a song during playback for easy composing.
The Song Mode section in the display of the MPC hardware
A Project can handle up to 32 songs, each consisting of up to 999 steps. You can create a song
by assigning a sequence to each step in the list and also set the number of times the MPC
software will repeat the sequence.
X Using the cursor buttons as well as the data dial or the -/+ buttons to navigate the Sequence
playlist.
X Press F6 (Insert) to insert a Sequence under the selected one, press F5 (Delete) to delete the
selected Sequence.
X Press F4 (Convert) to convert a Song into a Sequence.
X Press F1 (Clear) to delete all Sequences of a Song.
The Sequence playlist in the MPC software (on the left of the pads, under the Grid) gives you an
overview of the arranged sequences. As sequences are assigned to the pads, you can add a
To Next Page
Loading...
Need help?
General
