Akai MPC - Page 104

104
Pan 2 0 - 100 50 Q7
Pan 3 0 - 100 50 Q8
Damping 0 - 100 100 Q1
Gain 1 0 - 100 25 Q2
Gain 2 0 - 100 25 Q3
Gain 3 0 - 100 25 Q4
Distortion Fuzz
This popular effect uses hard clipping of the audio signal, which, at extreme settings, can turn a
standard waveform into a square wave, producing a "razor" effect.
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 100 Q9
Drive 0 - 100 50 Q10
Output 0 - 100 50 Q11
Low 0 - 100 50 Q5
Lo-Mid 0 - 100 50 Q6
Hi-Mid 0 - 100 50 Q7
High 0 - 100 50 Q8
Distortion Amp
This effect is designed to reproduce the sound of a tube amplifier at high volumes.
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 100 Q9
Drive 0 - 100 50 Q10
Tone 0 - 100 50 Q11
Dynamics 0 - 100 50 Q12
Output 0 - 100 50 Q5
Distortion Overdrive
This distortion is designed to sound like a mildly distorting amplifier at medium volumes. It is the
smoothest distortion type available.
Parameter Value Range Default Value Q-Link No.
Wet/Dry 0 (DRY) - 100 (WET) 100 Q9
Drive 0 - 100 50 Q10
Tone 0 - 100 50 Q11
Output 0 - 100 50 Q12