AKCP SensorProbe2 PLUS User Manual

SP2+ Introduction Manual
- 32 -
Features that needs separate licensing:
 5 Dry Contact option: Allows you to connect 5 dry contacts (input only) per sensor ports. See
below for more information.
 Access Control User licenses over 100: The first 100 user licenses are free (1 is always used
for the Admin user), and you can get more licensed users in blocks of 100; the limit is 1000.
 SNMPv3 feature: Allows you to use and configure secure, authenticated SNMP trap
messages.
 Virtual Sensors: Allows you to use and configure virtual sensors. The first 5 sensors are free,
you can get more license in blocks of 5; the limit is 50.
 VPN feature: Currently the APS VPN integration is supported, to use a secure VPN channel
between the unit and APS. Please note that when using this option, the number of maximum
sensors that can be used by the unit will be reduced to 50.
About Dry Contact Inputs
The dry contact inputs can be configured as inputs only up to 5 Volts.
Practical applications:
The dry contact inputs can be
used to monitor many types of
equipment, for example, you can
run the connection from warning
lights on alarm panels to the dry
contact inputs, so that when the
warning light on the alarm panel is
activated, the dry contact is
triggered, thus allowing you to
send notifications via emails or
SNMP traps.

AKCP SensorProbe2 PLUS Specifications

General

Brand	AKCP
Model	SensorProbe2 PLUS
Category	Measuring Instruments
Language	English