Akeeyo AKY-V360ST - Host Mounting Installation; Mounting Method

10
Installation Instructions
HostMounting
Use a fixed sliding arm and a fixed strap to install the machine on the original rearview mirror of the car.
※During installation, in order not to impose a strong load on the rear-view mirror in the car, please
fix the machine and the rear-view mirror firmly together.Please support while installing.
※When installing the sliding arm, do not forcefully pull the robotic arm.
<Mounting Method>：
1.The fixed sliding arm hooks the upper part of the rear view mirror, and at the same time pulls the
body downward to clamp the rear view mirror. (Pic 1)
2.Use the same method to install the other side and adjust the position of the machine.
3.After clamping the rearview mirror in the car, pull the fixing strap onto the hook of the sliding
arm.(Pic 2)
4.According to the state of the rearview mirror after installation, move the front camera lens back
and forth to adjust.
※Do not touch the lens part.
5.Put the original mirror and the machine together, and make sure that the machine is installed
in place.(Pic 3)
Pic 1
Pic 2
Pic 3
Mounting strap
Hostinstallationimage