Akeeyo AKY-V360ST - Cable Routing and Connection

RearCameraMounting（WithoutWaterproof）
Installation Instructions
3.Route the rear camera cable to the rear window.
In the illustration on the left, the underside of the car is wired,
but this depends on the type of car.
At this time, the cable of the rear camera must pass through the
upper part of the car (U-shaped roof, inner lining, etc.).
4.Connect the rear camera connection cable to the USB port of the rear camera body.
USB port (rear camera cable interface)
Paste it on the top of the rear window and adjust the angle to
record the best video.
※When adjusting the camera angle, please adjust while
supporting the camera body.
(If it is forced to rotate, it may cause separation from the bracket.)
12