Indicators on the Receivers 14 (36)
Sesam 800 Operating Manual Document-ID: 941211-000
Version: D1 Author: SH
7 Indicators on the Receivers
7.1 Sesam 800 RX
The Sesam 800 RX model has seven LED indicators that is displaying system
information (see g. 1 for positions of the LEDs).
The indications on the LEDs are as follows:
LED 1, Relay 1 status: LED ON indicates that the relay is active.
LED 2, Relay 2 status: LED ON indicates that the relay is active.
LED 3, Relay 3 status: LED ON indicates that the relay is active.
LED 4, Power: Indicates whether the receiver is powered on or not.
LED 5, Squelch: Indicates a detected signal on the operating
frequency band.
LED 6, Status: Indicates that information from a transmitter
associated with the receiver has been received.
LED 7, Learn: Indicates if the transmitter is in Learn Mode.
To Next Page
Loading...
Need help?
General
