Åkerströms SESAM 800 Series - 3 Technical Specifications

Technical Specications 5 (36)
Sesam 800 Operating Manual Document-ID: 941211-000
Version: D1 Author: SH
3 TechnicalSpecications
Tabell 1. TechnicalSpecications,Sesam800
SystemSpecications
Operating frequency: 869,8 MHz
Channel separation: 25 kHz
Power output: < 5 mW
Functional sensitivity: <= -107 dBm BER 10-4
Transmission principle: GMSK, TDMA
Operating Temperature: -25°C - +55°C
Storage Temperature: -40°C - +85°C
SpecicationsRX/RXD
IP- class: IP65
Power Supply, 12-24 V DC versions: 12-24 V AC/DC 150 mA (SELV),
max 4A fuse
Power Supply, 230 V AC versions: 230 V AC 50 Hz 15 mA, max 4A
fuse
Max switching capacity of relays: 2A/250VACwithcosφ=1
Total load on all relays: 4A/250 V AC (not exceeding 2A on
any single relay)
Relay- type SPDT
Fuse on current loop: 2,5AT/250 V AC (IEC 60127-2/V)
Dimensions: 135 x120 x 50 mm
Weight: 450g
Screw size TX20
SpecicationsDIN
Power Supply 12-24 V AC/DC
Max switching capacity of relays: 2A/250VACwithcosφ=1
Fuse on current loop: 2,5AT/250 V AC (IEC 60127-2/V)
Dimensions: 92 x72,5 x 30 mm
Weight: 84g