Åkerströms SESAM 800 Series - 1 Introduction; 2 Scope

Introduction 4 (36)
Sesam 800 Operating Manual Document-ID: 941211-000
Version: D1 Author: SH
1 Introduction
This manual only covers the installation of the Sesam radio remote door
opening system. The Sesam System is not a complete door opening system:
it provides only the set of outputs that are driven according to the actions
performed by the operator of the transmitter. The way the set of outputs is used
for controlling the doors depends on the specic installation and is outside the
scope of the Sesam.
The complete remote control system, where the controlled object is one part,
has to be tested and approved according to the standards/norms that are ap-
plicable and specic to the controlled object. This is not the responsibility of
Åkerströms Björbo.
2 Scope
The following guide must be used when installing Åkerströms Sesam door
opening system to ensure secure, safe operation. The installation must be car-
ried out by a certied electrician.