AKG PERCEPTION 120 USB - Configuration; Volume Control; Windows XP Configuration

Configuration / Volume control
20
Perception USB
Figure 3: Sound settings in WINDOWS XP
1) Open the sound settings in Control Panel.
2) Select the Audio tab.
3) Recommendation: The Sound playback device must be changed from
"Perception 120 USB" back to the original playback device.
Figure 4: Volume control in WINDOWS XP
4) If the AKG Perception 120 USB is not selected automatically as the
default sound recording device, select it using the drop-down menu.
5) Open the volume control on your recording software or click on Volume to
open the volume control window.
6) Use the slider to select the volume required for your recordings, see Level
Level Level
Level
setti
settisetti
settings
ngsngs
ngs (Page 24).
4 Configuration / Volume control
WINDOWS XP