C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
21. Debug
21.1.System Log for Debugging
System log in the indoor monitor can be used for debugging purpose. If you
want to export the system out to a local PC or to a remote server for
debugging, you can set up the function on the web Upgrade > Advanced >
System Log interface.
Parameter Set-up:
LogLevel: select log levels from 1 to 7 levels. You will be instructed by
Akuvox technical staff about the specific log level to be entered for
debugging purpose. The default log level is “3”. The higher the level is,
the more complete the log is.
Export Log: click the Export tab to export temporary debug log file to a
local PC.
Export Debug Log: click the Export tab to export debug log file to a local
PC.
Remote System Log: select “Enable” or “Disable” if you want to enable or
disable the remote system log.
Remote System Server: enter the remote server address to receive the
device and the remote server address will be provided by Akuvox
technical support.
To Next Page
Loading...
Need help?
General
