C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
4.Introduction to Configuration Menu
Status: This section gives you basic information such as product information,
Network Information, and account information, etc.
Account: This section concerns SIP account, SIP server, proxy server,
transport protocol type, audio&video codec, DTMF, session timer, etc.
Network: This section mainly deals with DHCP&Static IP setting, RTP port
setting, and device deployment, etc.
Phone: This section includes Time&language, call feature, dial management,
data import&export, door log, web relay.
Contacts: This section allows the user to configure the local contact list
store in the device.
Upgrade: This section covers Firmware upgrade, device reset&reboot,
configuration file auto-provisioning, PCAP.
Security: This section is for password modification, account status & session
time out configuration, as well as service location switching.
Settings: This section is including the RTSPD & voice assistance setup.
Arming: This section covers the configuration including, arming zone setting,
arming mode, disarm code, and alarm action.
Mode selection:
Discovery mode: It is a plug and play configuration mode. Akuvox devices
will configure themselves automatically when users power on the devices
and connect them to the network. It is super time-saving mode and it will
greatly bring users convenience by reducing manual operations. This mode
requires no prior configurations previously by the administrator.
Cloud mode: Akuvox SmartPlus is an all-in-one management system.
Akuvox Cloud is the mobile service that allows audio, video, remote access
control between smartphones and Akuvox intercoms. All configurations in
To Next Page
Loading...
Need help?
General
