C313X Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
10.5.VLAN Setting
VLAN (Virtual Local Area Network) is a logical grouping of two or more nodes
which are not necessarily on the same physical network segment but which
share the same logical IP domain. To be specify, the purpose of VLAN is to
separate layer 2 broadcast domain. Within trunk links, the tagged packet will
only be send to those ports with same VLAN ID. This is usually achieved by
switch or router. To configure VLAN function on the device web interface
Network > Advanced > VLAN Setting.
Parameter Set-up:
VLAN: Enable or Disable VLAN function.
Priority: VLAN Priority lets you assign a priority to outbound packets
To Next Page
Loading...
Need help?
General
