C313W-2 Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
66
13.2.2. Configure Alarm and Arming on the Web
Interface
To set up a location-based alarm sensor on the device web interface
Arming> Zone Setting > Zone Setting.
Parameter Set-up:
Location: set up the location according to where the alarm sensor is
stalled. You can select among ten location types: “Bedroom”, “Gate”,
“Door” “Guest room” ,“ Hall” ,“Window”, “ Balcony” ,“Kitchen”, “ Study” and
"Bathroom”.
To Next Page
Loading...
Need help?
General
