Akuvox C313W-2 User Manual

C313W-2 Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
82
 How to Notify DTMF: select among four options: “Disable” “DTMF”
“DTMF-Relay” “Telephone-Event” according to your need.
 DTMF Payload: select the payload 96-127 for data transmission
identification.
Note:
 Please refer to the chapter Relay Switch Setting for the specific
DTMF code setting. Intercom devices involved must be consistent
in the DTMF type, otherwise DTMF code cannot be applied.
14.3.2. Door Unlock via HTTP Command
You can unlock the door remotely without approaching the device physically
for the door access by typing the created the HTTP command (URL) on the
web browser to trigger the relay when you are not available by the door for
the door access. To do this configuration on web interface Phone > Relay >
Open Relay Via HTTP.

Akuvox C313W-2 Specifications

General

Brand	Akuvox
Model	C313W-2
Category	Monitor
Language	English