Akuvox C313W-2 - Alarm Action Configuration; Select Alarm Action Types

C313W-2 Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
70
13.2.7. Alarm Action Configuration
The triggering of the alarm sensor can be accompanied by the actions you
configured in forms of HTTP command, SIP Message, Call, Local Relay for
different security purposes.
13.2.7.1. Select Alarm Action Types
To select and set up actions on web Arming > Alarm Action interface.
Parameter Set-up:
 HTTP Command: enable HTTP command if you want the action to be
implemented on a designated third party device