C313W-2Indoor Monitor Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
44
10.6.SIP Call Configuration
DND (Do not disturb) setting allows you not to be disturbed by any unwanted
incoming SIP calls. You can set up DND related parameters properly on the
device web Phone > Call Feature > DND interface to block SIP calls you do
not intend to answer. In the meantime, you can also define the code to be
sent to the SIP server when you want to reject the call.
Parameter Set-up:
DND: check Whole Day or Schedule to enable the DND function. DND
function is disabled by default.
Schedule
：
enable DND schedule for your indoor monitor. To configure a
specific time to enable DND feature. If you choose Schedule for DND, the
Whole Day tab is available.
DND Start Time
：
the start time for DND schedule.
DND End Time: the end time for DND schedule.
10.7.Device Local RTP configuration
For the device network data transmission purpose, device needs to be set up
with a range of RTP port (Real-time Transport Protocol) for establishing an
exclusive range of data transmission in the network. To set up device local
RTP on web Network > Advanced > Local RTP interface.
To Next Page
Loading...
Need help?
General
