C319 Series Indoor Monitor Administrator Guide
Note
•
If you want to remove the contact from the blocklist on the web interface,
you can change the group to Default when editing the contact.
•
Name: enter the contact name.
•
Number: enter the SIP or IP number of the contact.
•
Group: select Default for the local contact group. Select Blocklist if you want to put
the contact in the blocklist.
•
Dial Account: select the account you want to call the contact from.
•
Ringtone: select the ringtone for the incoming call from the contact.
9.2.1
Import and Export Contact
You can import and export contacts in bath. The file should be in .xml or .csv format. To do
so, go to Contacts > Local Contacts > Local Contacts List.
9.2.2
Contact List Display Configuration
To conduct contact configuration on web Contacts > Local Contacts > Contacts List
Setting interface.
To Next Page
Loading...
Need help?
General
