C319 Series Indoor Monitor Administrator Guide
•
IP Address: set up the IP address if the static IP mode is selected.
•
Subnet Mask: set up the subnet mask according to your actual network environment.
•
Default Gateway: set up the correct gateway default gateway according to the IP
address of the default gateway.
•
Preferred/Alternate DNS Server: set up DNS (Domain Name Server) according to
your actual network environment. Preferred DNS Server is the primary DNS server
address while the Alternate DNS Server is the secondary server address and the
indoor monitor connects to the alternate DNS server when the preferred DNS server
is unavailable.
10.2
Device Deployment in Network
Akuvox C319 series indoor monitors should be deployed before they can be properly
configured in the network environment in terms of their location, operation mode, address,
and extension numbers as opposed to other devices for device control and the
convenience of the management. To deploy the device in the network on web Network >
Advanced > Connect Setting interface.
Parameter Set-up:
•
Connect Mode: It is automatically set up according to the actual device connection
with a specific server in the network such as SDMC or Cloud and None. None is the
default factory setting indicating the device is not in any server type, therefore you
are allowed to choose Cloud, SDMC in discovery mode.
•
Discovery Mode: check to turn on the discovery mode of the device so that it can be
discovered by other devices in the network, and uncheck if you want to conceal the
device so as not to be discovered by other devices.
To Next Page
Loading...
Need help?
General
