C319 Series Indoor Monitor Administrator Guide
Parameter Set-up:
•
RTSP Audio Enable: enable it if you want to monitor the device via RTSP audio
stream.
•
Authorization Type: select the authorization type (Basic, Digest). Select None if you
allow all types of authorization types for the RTSP audiostream.
•
User Name: type in the username used for the authentication.
•
Password: type in the username used for the authentication.
14.2
Alarm and Arming Configuration
Alarm feature is used to connect some alarm detection devices to protect your home safe.
Akuvox indoor monitors support 8 alarm connectors which means you can connect 8
different alarm sensors in different rooms of your house. For example, connecting a
smoker sensor in your kitchen to detect if the gas leak, the indoor monitor will ring up and
send the alarm message to the target, like community property.
14.2.1
Configure Alarm and Arming on the Device
To configure the arming and disarm code on the device Arming > Arming/Disarm Code
screen. Change the current password and save it.
To Next Page
Loading...
