C319 Series Indoor Monitor Administrator Guide
14.5
Remote Control
Remote control function supports configuring a specific server to send HTTP commands
or request to the indoor monitor to do some specific action on web Device > Relay >
Remote Control interface.
Parameter Set-up:
•
Allowed Access IP List: set up the server IP address that can be allowed to send the
HTTP commands to the indoor monitor.
14.6
Location
You can select the level of protection for the location of the indoor monitor. for example,
you can disable the location feature so that no app is allowed to obtain your device
location.
To set it up, go to Security > Advanced > Service.
Parameter Set-up:
•
Disabled: select Disabled if you do not allow any app to find your device location.
•
Only Device: the device location can be determined using GPS.
•
High Accuracy: the device location can be determined via WAN, Bluetooth, or cellular
networks.
To Next Page
Loading...
Need help?
General
