Preferred ServerPreferred Server: Enter the primary NTP server address for updating the time. The
default NTP server address is 0.pool.ntp.org.
Alternate ServerAlternate Server: Enter the backup NPT server address when the primary one fails.
Update IntervalUpdate Interval: Set the time update interval. For example, if you set it as 3600s, the
device will send a request to the NPT server for the time update every 3600 seconds.
System TimeSystem Time : Display the current device time.
You can also set up the time manually. Select Manual,Manual, and enter the date and time.
To Next Page
Loading...
