Obtain Device IP AddressObtain Device IP Address
Check the Device IP address by holding the push button. You can set up the IP announcement loop
times on the Device > AudioDevice > Audio interface.
Expiration(After Reboot)Expiration(After Reboot)
(Sec): (Sec): Set the time limit within which users should hold the call button to sound the IP
announcement after the device
reboot. If you select Always, users can hold the call button anytime for IP announcement afte
r the device reboot.
Loop Times:Loop Times: Set the IP announcement loop times.
Or search the device IP by the IP scanner in the same LAN network. Click RefreshRefresh to update the
list.
Access the Device SettingAccess the Device Setting
You can also enter the device IP address on the web browser in order to log in to the device web
interface where you can configure and adjust parameters, etc.
Access the DeviceAccess the Device
To Next Page
Loading...
