System LogSystem Log
System logs can be used for debugging purposes.
To set it up, navigate to the web Upgrade > Diagnose > System LogUpgrade > Diagnose > System Log interface.
Log Level:Log Level: Select log levels from 1 to 7 levels. You will be instructed by Akuvox technical
staff about the specific log level to be entered for debugging purposes. The default log level
is 3. The higher the level is, the more complete the log is.
Export Log:Export Log: Click the Export tab to export a temporary debug log file to a local PC.
Remote System Server:Remote System Server: Set the remote server address to receive the device log. The
remote server address will be provided by Akuvox technical support.
Remote System PortRemote System Port: Set the remote system serverās port.
Remote Debug ServerRemote Debug Server
When the device is having a problem, you can use the remote debug server to access the device
log remotely for debugging purposes.
To set it up, go to the Upgrade > Diagnose > Remote Debug ServerUpgrade > Diagnose > Remote Debug Server interface.
DebugDebug
To Next Page
Loading...
