To enable the IC card function, navigate to the Access Control > Card Setting > Card TypeAccess Control > Card Setting > Card Type
Support Support interface.
After adding users, you can export the user data and import it to another intercom device for quick
management.
On the Access Control > UserAccess Control > User interface, scroll to the Import/Export UserImport/Export User section.
Access SettingsAccess Settings
After user information and RF card code are entered, you can scroll down to the Access SettingAccess Setting
and configure RF card access control.
Note:Note:
Each user can have a maximum of 5 cards added.
The device allows to add 5,000 users.
RF cards operating at 125 KHz frequencies are compatible with the door phone for
access.
To Next Page
Loading...
