Unlock by RF CardsUnlock by RF Cards
The RF card should be assigned to a particular user for door opening.
When adding a user, you can also customize settings such as defining the door access schedule to
determine when the code is valid and specifying which relay to open.
To add a user, go to Access Control > UserAccess Control > User interface and click AddAdd.
User IDUser ID: The unique identification number assigned to the user.
NameName: The name of this user.
RoleRole: Define the user as a General User or an Administrator. The Admin card can be used
to add a user card. Please refer to Configure Admin Cards and User Cards for detailed
configuration.
CodeCode: The card number that the card reader reads.
Door Unlock ConfigurationDoor Unlock Configuration
To Next Page
Loading...
