DHCPDHCP: DHCP mode is the default network connection. If the DHCP mode is selected, the
device will be assigned by the DHCP server with IP address, subnet mask, default
gateway, and DNS server address automatically.
Static IPStatic IP: When static IP mode is selected, the IP address, subnet mask, default gateway,
and DNS server address should be configured according to the network environment.
IP AddressIP Address : Set up the IP address when the static IP mode is selected.
Subnet MaskSubnet Mask: Set up the subnet mask according to the actual network environment.
Default GatewayDefault Gateway: Set up the correct gateway according to the IP address.
Preferred/Alternate DNS ServerPreferred/Alternate DNS Server: Set up the preferred or alternate Domain Name
Server(DNS) server according to the actual network environment. The preferred DNS
server is the primary server while the alternate DNS server is the secondary one. The
secondary server is for backup.
Device Deployment in NetworkDevice Deployment in Network
To facilitate device control and management, configure Akuvox intercom devices with details such
as location, operation mode, address, and extension numbers.
To set it up, navigate to the web Network > Advanced > Connect SettingNetwork > Advanced > Connect Setting interface.
Server ModeServer Mode : It is automatically set up according to the device connection with a specific
server in the network such as SDMC, Cloud, or None. NoneNone is the default factory setting
indicating the device is not in any server type.
Discovery Mode EnabledDiscovery Mode Enabled: When enabled, the device can be discovered by other
devices in the network. When disabled, the device will be concealed and not be
discovered by other devices.
To Next Page
Loading...
