To set it up, navigate to the web Account > Basic > SIP AccountAccount > Basic > SIP Account Interface.
Status: Status: Indicate whether the SIP account is registered or not.
Account 1/Account 2: Account 1/Account 2: The door phone supports 2 SIP accounts.
- Account 1 is the default account for call processing. Also, it will be utilized when the
Akuvox SmartPlus cloud service is activated.
- The system switches to Account 2 if Account 1 is not registered.
- To designate the account to be used for outgoing calls, select the account number for
contacts or dial plan prefixes in their settings.
Display Label: Display Label: The label of the device.
Display Name:Display Name: The designation for Account 1 or 2 is to be shown on the device itself on
the calling screen.
Register Name: Register Name: Same as the username from the PBX server.
User Name: User Name: Same as the username from the PBX server for authentication.
Password: Password: Same as the password from the PBX server for authentication.
To Next Page
Loading...
