Video BitrateVideo Bitrate: The video stream bitrate ranges from 128 to 2048 kbps. The default
bitrate is 2048.
Video PayloadVideo Payload: The payload ranges from 90 to 119 for configuring audio/video
configuration files. The default is 104.
Configure DTMF Data TransmissionConfigure DTMF Data Transmission
In order to achieve door access via DTMF code or some other applications, you are required to
properly configure DTMF in order to establish a DTMF-based data transmission between the door
phone and other intercom devices for third-party integration.
To set it up, navigate to the Account > Advanced > DTMFAccount > Advanced > DTMF interface.
Type:Type: Select from the following options: Inband, RFC2833, Info, Info+Inband,Inband, RFC2833, Info, Info+Inband,
Info+RFC2833Info+RFC2833 based on the specific DTMF transmission type of the third party device to
be matched with as the party for receiving signal data.
How to Notify DTMFHow to Notify DTMF: Select Disabled, DTMF, DTMF-RelayDisabled, DTMF, DTMF-Relay, or Telephone-EventTelephone-Event
according to the specific type adopted by the third-party device. You are required to set it
up only when the third-party device to be matched with adopts InfoInfo mode.
PayloadPayload: Set the payload according to the specific data transmission payload agreed on
between the sender and receiver during the data transmission.
To Next Page
Loading...
