Video ResolutionVideo Resolution: Specify the image resolution, varying from the lowest CIF(352×288
pixels) to the highest 1080P(1920x1080 pixels).
Video Frame rate(fps)Video Frame rate(fps): Frames per second, refers to how many frames are displayed in
one second of video. The default frame rate is 30fps.
Video Bitrate(Kb/Sec)Video Bitrate(Kb/Sec): The amount of video data transferred in a specific duration of
time. A higher video bitrate means a higher possible quality, but also higher file sizes and
more bandwidth. The default is 2048 kbps.
2nd Video Resolution2nd Video Resolution: Specify the image resolution for the second video stream
channel.
2nd Frame rate(fps)2nd Frame rate(fps): Set the frame rate for the second video stream channel.
2nd Video Bitrate(Kb/Sec)2nd Video Bitrate(Kb/Sec): Set the bit rate for the second video stream channel. The
default is 512 kbps.
RTSP OSD SettingRTSP OSD Setting
This feature is used to add a watermark to the RTSP video or picture.
Set it up on the web Surveillance > RTSP > RTSP OSD SettingSurveillance > RTSP > RTSP OSD Setting interface.
To Next Page
Loading...
