Tamper Alarm SettingTamper Alarm Setting
The tamper alarm function prevents anyone from removing the devices without permission. It does
this by setting off the tamper alarm and making calls to a designated location when the device
detects a change in its gravity value from the original one.
Set it up on the Security > Basic > Tamper AlarmSecurity > Basic > Tamper Alarm interface. Click Disarm to clear the alarm.
Trigger Options:Trigger Options: Select what can be triggered when the gravity sensor is triggered.
Client Certificate SettingClient Certificate Setting
Certificates ensure communication integrity and privacy. To use the SSL protocol, you need to
upload the right certificates for verification.
Web Server CertificateWeb Server Certificate
It is a certificate sent to the client for authentication when the client requests an SSL connection with
the Akuvox door phone. Please upload the certificates in accepted formats.
Upload Web Server Certificate on the web Security > Advanced > Web Server CertificateSecurity > Advanced > Web Server Certificate
interface.
SecuritySecurity
To Next Page
Loading...
