Configuration Files for Auto-provisioningConfiguration Files for Auto-provisioning
Configuration files have two formats for auto-provisioning. One is the general configuration files
used for the general provisioning and the other one is the MAC-based configuration provisioning.
The difference between the two types of configuration files is shown below:The difference between the two types of configuration files is shown below:
GeneralGeneral configurationconfiguration provisioningprovisioning : a general file is stored in a server from which all
the related devices will be able to download the same configuration file to update
parameters on the devices, such as cfg.
MAC-based configuration provisioningMAC-based configuration provisioning: MAC-based configuration files are used for
auto-provisioning on a specific device, as distinguished by its unique MAC number. The
configuration files named with the device MAC number will be matched automatically with
the device MAC number before being downloaded for provisioning on the specific device.
AutoP ScheduleAutoP Schedule
Akuvox provides you with different Autop methods that enable the device to perform provisioning for
itself according to the schedule.
To set it up, go to Upgrade > Advanced > Automatic AutopUpgrade > Advanced > Automatic Autop interface.
NoteNote
The configuration file should be in CFG format.
The general configuration file for the in-batch provisioning varies by model.
The MAC-based configuration file for the specific device provisioning is named by its
MAC address.
If a server has these two types of configuration files, devices will first access the
general configuration files before accessing the MAC-based configuration files.
You may click herehere to see the detailed format and steps.
To Next Page
Loading...
