Akuvox HCP-R15P User Manual

60
 DHCP option: If configured, IP Phone will use
designated DHCP option to get Auto Provisioning
server’s address via DHCP.
This setting require DHCP server to support
corresponding option.
Manual Autop
To display and configure manual update server’s
settings.
 URL: Auto provisioning server address.
 User name: Configure if server needs an username
to access, otherwise left blank.
 Password: Configure if server needs a password to
access, otherwise left blank.
 Common AES Key: Used for IP phone to decipher
common Auto Provisioning configuration file.
 AES Key(MAC): Used for IP phone to decipher
MAC-oriented auto provisioning configuration
file(for example, file name could be
0c1105888888.cfg if IP phone’s MAC address is
0c1105888888).
Note: AES is one of many encryption, it should be
configure only configure filed is ciphered with AES,
otherwise left blank.
Automatic AutoP
To display and configure Auto Provisioning mode
settings.
This Auto Provisioning mode is actually self-explanatory.
For example, mode “Power on” means IP phone will go
to do Provisioning every time it powers on.
System Log
To display syslog level and export syslog file.

Syslog level:From level 0~7.The higher level means
the more specific syslog is saved to a temporary file.
By default, it’s level 3.

Export Log: Click to export temporary syslog file to
local PC.

Remote System Log: To enable or disable Remote
System Log.

Remote System Server: To input the syslog server
address.
PCAP
To start, stop packets capturing or to export captured
Packet file.
 Start: To start capturing all the packets file sent or
received from IP phone.
 Stop: To stop capturing packets.
Note: IP phone will save captured packets file to a
temporary file, this file maximum size is 1M(mega

Akuvox HCP-R15P Specifications

General

Brand	Akuvox
Model	HCP-R15P
Category	Telephone
Language	English