8 Intercom-RTSP
Sections Description
RTSP Basic To active the RTSP function, then R26 can be monitored.
RTSP Stream To enabled RTSP video and select the video codec. R26
supports H264,H263 video codec. H264 by default.
H.264 Video Parameters H264: A video stream compression standard. Different from
H263, it provides an approximately identical level of video
stream quality but a half bit rate. This type of compression is
sometimes called MPEG-4 part 10.
To modify the resolution,framerate and bitrate of H264
MPEG4 Video Parameters MPEG4: it is one of the network video image Compression
standard. It supports the maximum Compression ratio
4000:1. It is an important and commom video function with
great communication application integration ability and less
core pragram space.
To modify the resolution,framerate and bitrate of MPEG4
MJPEG Video Parameters MJPEG: called Motion Joint Photographic Experts Group. It is
a video encoding format.in which each image is compressed
separately by JPEG.MJPEG compression can produce high
To Next Page
Loading...
Need help?
General
