Akuvox R26 User Manual

9
Back cover installation:
Take down the back
cover ,cable buckle
and sealing ring
Make cables go through all
the components of the
bottom hole of the back
cover , connect with the
contacts in the main board.
Then put the cable buckle
and sealing ring into the back
cover.
Use 4 M3x5 screws to
fix the back cover
Place R26 into the
wall bracket hole .
Push down so that
the device is fixed
securely. Lock the
the M3X10 screws at
the bottom of
device.

Akuvox R26 Specifications

General

Brand	Akuvox
Model	R26
Category	Intercom System
Language	English