HP105/HP405 User manual
Page. 19
Quick reference
Operation resume
Should you are now familiar with your transceiver you do know now that it’s very easy to use one of its
function, you just have to do what follows:
1) Press the
MON
to enable/disable GROUP MODE.
2) Press and Hold
MON
button to enable/disable the squelch.
3) Press the
MON + FUN
keys at the switching ON to enter the SCAN.
4) Before entering the SCAN MODE, use the channel selector knob to select the priority channel.
5) Hold the
FUNC
key and switch on the radio to enable/disable VOX.
6) When VOX function is enabled, Press the
FUNC
to set HIGH or LOW VOX sensitivity.
"
Press the MON key and switch on the unit. The unit enters the PROGRAMMING MODE. This
operation is only allowed to authorized person.
To Next Page
Loading...
