EasyManua.ls Logo

Albrecht Tectalk Duo - Safety Instructions; Troubleshooting

Albrecht Tectalk Duo
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
English
11. Safety instructions
Repairs may only be carried out by specialist vendors or authorized service partners.
Do not open the radio or make any modications to the radio.
Do not expose the radio to direct sunlight or extreme heat for long periods of time.
Do not place the transceiver on an unstable surface.
Keep the transceiver away from dust, moisture and water.
Do not operate the transceiver or charge the battery in potentially explosive environments.
12. Troubleshooting
The device cannot be switched on or
switches off automatically.
1. Charge the battery or insert a
replacement battery.
2. Is the battery inserted correctly?
3. Clean the contacts before charging.
I cannot communicate with other users. 1. make sure that you are on the same
channel and subchannel (CTCSS/DCS).
2. you are outside the transmission range
of the other radios.
I can hear the other user, but they cannot
hear me.
Check whether you are using the same
channel as the person you are talking to,
and if they are using a CTCSS or DCS
code, you must also use the same code in
order to be heard.
Other participants only hear me
intermittently.
1. The signal is too weak - you are too far
apart.
2. Is the microphone defective? Please
contact your vendor.
I hear radio messages from other groups. Other users are using the same channel as
you. Change the channel.

Related product manuals