QUICK START GUIDE
KIT CONTENT
x 1 x 1
Quick Start GuidePower Adapter
x 1
SETUP THE CAMERA
1. APP DOWNLOAD
Please download and install the "OMGuard HD" APP to your device.
2. Power on the camera
Plug in the included power adaptor to the
bottom of the camera and the other end to
the power outlet.
PRODUCT OVERVIEW
3a. Direct Wireless Connection
(1) Go to the Wi-Fi setting on your mobile device. Choose the Wi-Fi router with a prex of HD-xxxxxx
(xxxxxx=Camera ID numbers). Enter the default password 12345678 and save the settings.
(2) Launch the APP, tap to add the camera
(3) Tap (QR code icon) and scan the QR code label on the back
of the camera to bring up the DID information.
Or tap "search" and select the camera DID.
(4) Enter the default password 123456 and save the settings.
Wireless Appcam
x 1
Note:
For video recording,
BE SURE TO
use CLASS 10 memory card or above (not included). Other kinds of memory card
may cause unexpected results and should be avoided.
Note:
Press the Reset for 5 seconds to reset the camera.
x 1
Screw Pack
Power Adapter
Reset button
FHD Camera
Light Sensor
Speaker
Microphone
USB connector
For iOS
For Android
2
3
4
power
Status Indicator
Memory Card Slot
USB to RJ-45
Connector Cable
AWF21 1080p Panoramic Wi-Fi Camera
To Next Page
Need help?
General
