To Next PageTo Next PageWhat to do if I am unable to pair my ALC Security Camera to the monitor?
If you're having trouble pairing your ALC Security Camera to the monitor, ensure the camera is powered on. Quickly press and release the pairing button (do not hold it). Try turning the monitor off and restarting it. If the power button is unresponsive, use a pin to press the reset button on the monitor's side.
How to fix an ALC Security Camera with no image?
If your ALC Security Camera isn't displaying an image, the screen lock might be enabled. Tap the Power button to unlock the screen. Also, verify that the camera's power is on and the monitor is sufficiently charged or connected to the adapter. If the issue persists, try moving the camera closer to the monitor or adjust the antennas on both the camera and monitor for optimal reception.
Why is standard or scheduled recording not working on my ALC Security Camera?
If standard or scheduled recording isn't functioning correctly on your ALC Security Camera, first, make sure that the date and time are correctly set. Next, verify that the recording schedule is properly configured. Also, ensure that an SD card is inserted into the monitor and has been formatted. Finally, confirm that there is movement detected to trigger the motion sensor.
How to improve poor picture quality on ALC Security Camera?
To improve poor picture quality on your ALC Security Camera, try moving the camera closer to the monitor or adjusting the antennas on both the camera and monitor for better reception. Additionally, clean the camera lens with a microfiber cloth.
Why does my ALC Security Camera show a white image at night?
If your ALC Security Camera displays a white image at night, it's likely due to the camera's infra-red LEDs reflecting off surfaces like glass. To resolve this, position the camera on the opposite side of the window to enhance night vision, or place it in a well-lit area, such as by installing a security lamp to improve lighting.
What to do if the motion sensor on my ALC Security Camera isn't responding?
If the motion sensor on your ALC Security Camera isn't responding to movement, try adjusting the sensitivity settings of the motion sensor. Also, check the settings on the Record screen.
General| Brand | ALC |
|---|---|
| Model | Observer AWSC336 |
| Category | Security Camera |
| Language | English |
Warning regarding strangulation hazard from power cords and infants.
Provides advice for optimal camera placement and signal reception.
Step-by-step guide for mounting and connecting the camera hardware.
Introduces new cameras to the system so they can communicate.
