45
RAIN-SHIELDS
FIXING TO THE FLUSH-MOUNTED BOX
Fix the rain-shield to the flush-mounted box by means
of the supplied 4 self-screwing screws.
Once the connections have been made, close the
entrance panel and press it against the rain-shield (1)
and fix it to the flush-mounted box and to the rain-shield
with the entrance panel’s fixing screws (2). Adjust the
upper and lower decorative fittings (3) and fit the upper
plug of the rain-shield (4).
FIXING TO THE SURFACE WALL-MOUNTED BOX
Fix the rain-shield to the surface wall-mounted box
using the 4xM3 screws supplied.
Once the connections have been made, fix the entran-
ce panel to the surface wall-mounted box and to the rain-
shield with the entrance panel’s fixing screws (1). Adjust
the upper and lower decorative fittings (2) and fit the
upper plug of the rain-shield (3).
To Next Page
Loading...
