46
REPLACEMENT OR COVER FRAMES
FIXING TO THE FLUSH-MOUNTED BOX
Fix the frame to the flush-mounted box using the 4
screws which are supplied with the product.
Once the connections have been made, close the
entrance panel and press it against the frame (1) and fix
it to the flush-mounted box and to the frame with the
entrance panel’s fixing screws (2). Adjust the upper and
lower decorative fittings of the entrance panel (3).
FIXING DIRECTLY TO THE WALL
Place the supplied bolts in the frame. In this way, the
frame is ready to receive the entrance panel later.
Make the necessary holes in the frame and fix it to the
wall in the desired place.
Once the connections have been made, fix the entran-
ce panel to the frame with the entrance panel’s fixing
screws (1). Adjust the upper and lower decorative fittings
of the entrance panel (2).
To Next Page
Loading...
Need help?
General
