The following PM counters are only applicable to the X4IP and X5IP option cards.
• g2EINB: incoming bytes of green frames with traffic class 2
• y2EINB: incoming bytes of yellow frames with traffic class 2
• g3EINB: incoming bytes of green frames with traffic class 3
• y3EINB: incoming bytes of yellow frames with traffic class 3
• g2EINF: number of incoming green frames with traffic class 2 (X4IP only)
• y2EINF: number of incoming yellow frames with traffic class 2 (X4IP only)
• g3EINF: number of incoming green frames with traffic class 3 (X4IP only)
• y3EINF: number of incoming yellow frames with traffic class 3 (X4IP only)
• c3EIN: incoming layer 1 payload bytes of green frames with traffic class 3 or
internal (trapped) frames
• c2EIN: incoming layer 1 payload bytes of green frames with traffic class 3 or
traffic class 2 or internal (trapped) frames
• i3gEILS: Loaded Second for incoming traffic with class 3 or internal traffic
(supports threshold notification)
• i32gEILS: Loaded Second for incoming traffic with class 3 or class 2 or internal
traffic (supports threshold notification)
• i3gEISLS: Severely Loaded Second for incoming traffic with class 3 or internal
traffic (supports threshold notification)
• i32gEISLS: Severely Loaded Second for incoming traffic with class 3 or class 2 or
internal traffic (supports threshold notification)
PM counters for low quality traffic load (per TC/port)
The 1643 AM / 1643 AMS supports performance monitoring parameters for traffic
management in ’bytes per traffic class’ on ingress and egress ports. Users can select
any individual TC per port that is terminated in the 1643 AM / 1643 AMS for
performance monitoring (including binning and thresholding).
The following PM counters are only applicable to the X4IP and X5IP option cards.
• g0EINB: incoming bytes of green frames with traffic class 0
• y0EINB: incoming bytes of yellow frames with traffic class 0
• g1EINB: incoming bytes of green frames with traffic class 1
• y1EINB: incoming bytes of yellow frames with traffic class 1
• g0EINF: number of incoming green frames with traffic class 0 (X4IP only)
• y0EINF: number of incoming yellow frames with traffic class 0 (X4IP only)
• g1EINF: number of incoming green frames with traffic class 1 (X4IP only)
• y1EINF: number of incoming yellow frames with traffic class 1 (X4IP only)
Ethernet Overview
Performance monitoring
....................................................................................................................................................................................................................................
11-68
Alcatel-Lucent - Proprietary
See notice on first page
365-312-801R7.2
Issue 3, May 2007
To Next Page
Loading...
