Page 148 7450 ESS OS Basic System Configuration Guide
vr-id virtual-router-id — The virtual router ID for the existing IP interface, expressed as a decimal integer.
interval seconds — Configures the interval for each display in seconds.
Default 5 seconds
Values 3 — 60
repeat repeat — Configures how many times the command is repeated.
Default 10
Values 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the
delta.
subscriber
Syntax subscriber sub-ident-string sap sap-id sla-profile sla-profile-name [base | ingress-queue-id
ingress-queue-id | egress-queue-id egress-queue-id] [interval seconds] [repeat repeat]
[absolute | rate]
Context monitor>service
Description This command monitors statistics for a subscriber.
Parameters sub-ident-string — Specifies an existing subscriber identification profile to monitor.
sap sap-id — Specifies the physical port identifier portion of the SAP definition.
Values dlci 16 — 1022
sla-profile sla-profile-name — Specifies an existing SLA profile.
interval seconds — Configures the interval for each display in seconds
Default 11
Values 11 — 60
repeat repeat — Configures how many times the command is repeated.
Default 10
Values 1 — 999
absolute — When the absolute keyword is specified, the raw statistics are displayed, without processing.
No calculations are performed on the delta or rate statistics.
Default mode delta
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead of the
delta.
base — Monitor base statistics.
To Next Page
Loading...
